Type: Lathes, VTL (Vertical Turret Lathe) Manuf: Prasad Model: DTCV 5000 NEW 200" (5.1m) PRASAD PNC–DTCV 5000 CNC DOUBLE COLUMN VERTICAL TURNING MILLING CENTER WITH FULL “C” AXIS. TECHNICAL SPECIFICATION TYPE: VERTICAL LATHE  DOUBLE COLUMN 1. MACHINE 1.1      CAPACITY a   Swing   dia 5100 mm b   Max.turning dia    dia 5100 mm c   Max. height of work piece    3000 mm d   Permissible mass of work piece   60 ton 1.2      TABLE a   Size   dia 4500 mm b   Speed   1- 50 RPM c   Max.Torque   100 KN d   Max.cutting  force    60000 N e   Motor   100Kw/ 140AC continues/ 30 minutes rating 1.3        Rail Head                                                          1 Set a   Ram Size    340 mm X 340 mm b   Motor ( X)   50 Nm 1.4      Travel  (stroke ) a   Rail head ( X)   28 00 mm + ATC stroke b   Ram ( Z )    1500 mm c   Cross rail ( W )   2100 mm  (Programmable ) 1.5        Feed rate a   Rail head ( X )    1 – 5000 mm / min b   Ram ( Z )    1 – 5000 mm / min 1.6            Rapid traverse rate a   Rail head ( X )    7000 mm / min b   Ram ( Z )    7000 mm / min 1.7            Feed force a   Rail head ( X )    60 KN b   Ram ( Z )   60 KN 1.8   Weight    120 ton 2                          Accessory 2.1                      Portable Operation Panel  1 Set ( Keyboard layout to be decided later ) 2.2    Coolant supply unit  (Flood )   1 set a   Coolant type    Water – miscible cutting fluid b   Nozzle    1 nozzles at RAM end C    Coolant tank    1000 L d   Oil – in – water separator    1 Set 2.3   Platform for operator    Telescopic Type 2.4   Chip conveyor    Chain Type 2.5   Scale feed back    X , Z axes  Heiden Hein 2.6   DNC ( Distributed Numerical Control ) interface    Provided 2.7   Levelling block for installation    1 Set 3                          Numerical control 3.1   Manufacturer   FANUC 3.2   Model    Oi 3.3   Function     3.4   Air conditioning of CNC panel    SUPPLIED as standard with our electrical panels. 4                            Accuracy    4.1     General    Complied with ISO 3655 4.2    Additional    dia 0.02 mm a   Circularity    dia 0.02 mm on length b   Cylindricity    Dia 0.03 mm on length 1000 mm c   Flatness    Dia 0.05 mm on length 2000mm allowed concave is as per ISO 3655 5                          Environment 5.1   Can be used properly in US atmosphere temperature and humidity conditions. Temp. 5 to 45°C ( temp. difference between day and night may be up to 20°C ) Humidity up to100% 5.2   Power supply to be provided by user is as follows Volt. 415 V ± 10% AC 60 Hz + 1.5 Hz – 2.5 Hz    3 Phases + grounding cable. NOTE:  A STEP UP TRANSFORMER WILL BE PROVIDED . 6      Documents to be submitted 6.1    Immediately after P.O. a   Machine and NC spec including machine and foundation layout drawings   2 Hard / Soft 6.2    Before takeover a   Instruction and maintenance manual for machine tool    b   Instruction and maintenance manual for NC     c   Circuit diagram excluding NC   M/c RAL – 7035 – 5015 – moving parts. d   Spare parts list